- Overview
- Product Description
- Detailed Photos
- Product Parameters
- FAQ
Basic Info.
Product Description
Button Functions:
Power On:**
- Insert the 24V power supply, and the red indicator light will turn on.
- Short press the button to enter the "Jellyfish Mode."
- In "Jellyfish Mode," short press the button to switch to "Flame Mode," and short press again to power off, cycling through these modes. (White indicator light stays on)
- Unplug the power supply to turn off the device.
**Spray Mode 1:**
- Upon power on, default to "Jellyfish Mode" at medium speed.
- After 5 seconds, start emitting jellyfish mist rings every 2 seconds.
- Turn the knob left to enter low speed (emitting mist rings every 3 seconds) and return to medium speed by turning the knob right.
- Turn the knob right again to enter high speed (emitting mist rings approximately every 1 second).
**Spray Mode 2:**
- Short press the button to enter "Flame Mode" (mist sprays slowly from the side holes).
- Clockwise rotation of the motor is timed: double-click the button to set a 3-hour timer (middle light on the button turns white), double-click again for a 6-hour timer (corresponding white light turns on), and double-click once more to cancel the timer, cycling through these options.
**Remote Control Instructions:**
- Short press the power button on the remote to turn on, short press again to switch modes, and short press to turn off in a loop.
- Short press the light button on the remote to switch between blue light, breathing light, and turn off the light in a loop.
**Timer:**
- Single click the 3H button to set a 3-hour timer (middle light on the button turns white), and single click again to turn off the timer (middle light turns off).
- Single click the 6H button to set a 6-hour timer (corresponding white light turns on), and single click again to cancel the timer, cycling through these options.
**Jellyfish Mode:**
- Short press the + button on the remote to accelerate the jellyfish leaf rotation, and press the - button to slow it down.
- Jellyfish leaf rotation has three speeds: slow (fan interval 3 seconds), medium (fan interval 2 seconds), and fast (fan interval 1.2 seconds).
- Default is medium speed upon power on (adjustable by turning the switch left or right).
**Specifications:**
- Input Voltage: DC24V
**Notes:**
1. Add water before using the product. Do not use the humidification function when there is a lack of water.
2. Do not clean the product directly with a tap. Use a soft cloth to wipe it to avoid short circuits.
3. Do not allow children aged 0-6 to use the product alone.
4. Do not tilt or invert the water tank when it has water.
Button Functions: | Power On | Insert the 24V power supply, and the red indicator light will turn on |
Short press the button to enter the "Jellyfish Mode. | ||
In "Jellyfish Mode," short press the button to switch to "Flame Mode," and short press again to power off, cycling through these modes. (White indicator light stays on) | ||
Unplug the power supply to turn off the device. | ||
Spray Mode 1 | Upon power on, default to "Jellyfish Mode" at medium speed. | |
After 5 seconds, start emitting jellyfish mist rings every 2 seconds. | ||
Turn the knob left to enter low speed (emitting mist rings every 3 seconds) and return to medium speed by turning the knob right. | ||
Turn the knob right again to enter high speed (emitting mist rings approximately every 1 second). | ||
Flame Mode 2 | Short press the button to enter "Flame Mode" (mist sprays slowly from the side holes). | |
Clockwise rotation of the motor is timed: double-click the button to set a 3-hour timer (middle light on the button turns white), double-click again for a 6-hour timer (corresponding white light turns on), and double-click once more to cancel the timer, cycling through these options. | ||
Remote Control Instructions | Short press the power button on the remote to turn on, short press again to switch modes, and short press to turn off in a loop. | |
Single click the 6H button to set a 6-hour timer (corresponding white light turns on), and single click again to cancel the timer, cycling through these options. |
A: Yes, samples is highly welcome
2. Can we do our logo on the machine?
A: Yes, we have MOQ for customized LOGO.
3. How to order?
A: Tell us the model you want to order, we will send you our Proforma Invoice for your confirmation and payment, we will prepare the goods after payment is well received.
4.Can you do ODM project?
A: Yes, we have a professional team with above 10 years experience in product structure and appearance design.
5. Is it ok to print my logo on the product?
A:Please send your artwork to us, we can make it. We also can support to make it in small order quantity.accordingly, the cost will be different based on different quantity.